Induction wok cooker: complete planning for transition from gas

Medium-sized kitchens are converted from commercial induction wok cooker and are not a net replacement for a bath. Electricity, ventilation, appliance selection, lithium appliances and cooker operations are planned together.

Ni-Kovic Ni-Kovic Ni-Kovic Kitchen Equipment Electrification of kitchens, date of launch: 2026-06-22 | Update: 2026-11-07
Short answers: Medium-sized kitchens can be transferred from a gas lithium to a commercial induction wok cooker, but pre-rehabilitations are to be assessed by a qualified electro-technician for electricity supply, terrain and total loads, confirming the configuration of lithium, ventilation of magnetic appliances and cookers, which can be carried out in stages on site conditions and should not be purchased directly from the power assessment.

The paper is suitable for the preparation of new furnaces, the renovation of old bathrooms, or for the conversion of burn gas to the cafeteria of induction cooker, the head of the kitchen and the messenger, which will be measured by pre-rehabilitation assessments, commercial induction wok cooker selection, electricity supply, ventilation, cook adaptation, and progressive cost accounting for engineering processes.

Ni-Kovic has since 2013 provided commercialkitchen equipment and cafeteria equipment, as well as home building facilities in the country, and you can see you first. Commercial Induction Equipment, Complete Kitchen Project Services, or Contact Us Reference.

I. Pre-transformation: first cartridge the reasons for commercial induction cooker

The cafeteria consider gas switching magnets, which may include the desire to reduce the fire, improve the working environment of the kitchens, cooperate with the new building, change the energy mix, or integrate kitchen equipment. The different objectives will affect the scope of the work, and it is suggested that the issues to be addressed should be first clearly and discussed.

Status of the first-come kitchens

  • Number, type, duration of use and duration of daily operation of existing appliances.
  • Types of vegetables, cumbersome breaks, and the most commonly used appliances of gypsy.
  • Available electricity grids, appliances, electrical cables and available electrical information.
  • Gas equipment, plutonium plumbing, pyrotechnic flue, pyrotechnic plumbing and compensatory arrangements.
  • The bath size, fencing, water, walking and equipment openings.

Severely altered works for electrification of the cobalt house

The removal of gas burns and the induction cooker to the place of origin is not necessarily complete on behalf of the works; commercialinduction cooker may require independent power supply, suitable cables and lines, as well as identification of heat, work loads, compatibility of appliances, ventilation homogeneity, and therefore transition should be made as a kitchen equipment project rather than simply purchasing a commercial kitchen equipment.

II. First step: electricity supply and terrain assessment

The most important pre-occupation conditions for the electrification of medium-sized kitchens in the electrical system are collected, with a flat rate of power with pressure for each equipment being collected, and a check by registered electrical engineering personnel of the field power supply, cables, lines, back-to-ground protective devices to confirm the availability of security support for the expected load.

List of equipment loads established

Not counting only induction wok cooker. Lectric steam cabinet, dim sum steamer, rice roll steamer, blows, chicks, refrigeratorator and heat water equipment operated at the same time in the kitchen, which can be collated with the following table and eventually handed over to professional electrotechnicians:

EquipmentNumberEnrolment powerRestricted pressure/multiplateWhether to operate simultaneously
Commercial Induction Wok CookersCompleted by fieldProduct mottoElectricity according to product specifications and on-siteAssessment by time of operation
Electric Steam CabinetsCompleted by fieldProduct mottoElectricity according to product specifications and on-siteAssessment by time of operation
dim sum steamer/rice roll steamerCompleted by fieldProduct mottoElectricity according to product specifications and on-siteAssessment by time of operation
electric fryer/扒炉Completed by fieldProduct mottoElectricity according to product specifications and on-siteAssessment by time of operation
commercial refrigerator and other equipmentCompleted by fieldProduct mottoElectricity according to product specifications and on-siteAssessment by time of operation

Examples of public specifications of Ni-Kovicinduction cooker

Ni-Kovic Induction Wok Cooker with Rear Stock Pot IW-15K/18K/25K, power 15KW/18KW, pressure 380V, 3PH, 50Hz. Low-Level Induction Stock Pot Cooker For IS-12K/15K/18K, the power ratio 12KW/15KW/18KW is also 380V, 3PH, 50Hz, which are examples of individual product specifications and do not represent all commercial induction cooker using the same pressure.

Important: The specifications of the equipment are not directly related to the design of electricity; the equipment is accounted for by registered electrical engineering personnel on the basis of the equipment motto, supply conditions, lines, appliances and concurrent operations; and the high-power commercial equipment is not self-reliant until the evaluation is completed.

III. Second step: reassessment of ventilation, ventilation and heat

The combustion of the fire and its associated heat sources will change after the gas switching magnetic, but the medium-size clouds still produces oil flue and the furnace, and therefore it should not be the direct assumption that the pyrotechnic pyrotechnician can be demolished or reduced.

The pump system is to be reconciled with actual ramps

  • Confirmation of pyrotechnic stoves and other locations where oil smoke is generated.
  • The adequacy of ventilation, ventilation and ventilation arrangements for the physical kitchens is checked.
  • steam cabinets, cemetery and rice roll steamer need to consider gas and drainage.
  • The appliances and ventilation equipment are positioned in conjunction with the puppet operation and clean access.

Smoking, work or septic tanks may be searched at the same time if they are required Stainless Steel Equipment and through One-stop commercial kitchen engineering services Harmonization of equipment with construction sites.

IV. Third step: selection of appropriate commercialinduction wok cooker

The selection of medium-size appliances does not look at the power figures alone. The commercial induction cooker often has a veil, a flat veil, a chicken, a chicken, a chicken, a chicken, a shop and a constellation of electricity.

面induction wok cooker: small and medium-sized migrating

The veterinary design is fitted with the cycling and blast cooking. Ni-Kovic ' s available open product is Ni-Kovic. Induction Wok Cooker with Rear Stock Pot At the end of the ex-husband, it is appropriate to combine vegetables and palm demand at the same place of work.

Platinduction cooker: copper, copper and multi-labour jobs

A flatinduction cooker (flat-top induction cooker), in conjunction with a magnetic appliance, is suitable for copper, copper and lithium. Single-Zone Countertop Induction Cooker Copies may be accessed if they are to be processed simultaneously Double-Zone Countertop Induction Cooker Doubt requirements can be accessed Four-Zone Freestanding Induction Range.

Electromagnetic tumours: gallons

The electromagnetic aluminium is low, facilitates the emplacement and movement of large tubes, often used for cooking, cooking and cooking water. The Ni-Kovic product page lists IS-12K/15K/18K three models; the actual number, size and electricity are suitable for the site, based on product information and the assessment of electricians.

How do one head? Decision by peak break-up process

  • Single Induction Wok Cooker : A single-labour position or ancillary position.
  • Double Induction Wok Cooker Two embryonic posts could be arranged simultaneously; the current catalogue did not appear in an independent two-shelf type and could be retrieved for configuration.
  • Single Wok Cooker with Rear Stock Pot : An aluminium culminated with vegetables and the ringing of water.
  • Double Wok Cooker with Shared Rear Stock Pot In the event of this configuration, the supplier is requested to confirm the actual number, size and electricity specifications.
  • Induction Combination Ranges :: Integrating multiple migrating sites, suitable for space-limited but large-scale kitchens; accessible Combination Ranges.

7 items to be reconciled prior to selection

  1. Painting and cooking methods : Explosions, tungsten, blankets or blankets will affect the type of face.
  2. Superintendents : An estimate of the number of simultaneous surges required with a cumbersome time frame.
  3. Cookware :: Recognition of the availability of magnetic magnetic magnetic magnetic for existing aluminium, aluminium or tubes and whether the size fits.
  4. Electricity Reconciling proficiency, electric pressure, interval and total load.
  5. Size size : Extensive, deep and high, together with maintenance and cleaning space.
  6. Pumping and ventilation : Verification by actual oil cigarettes, gas and kitchen layouts.
  7. Operational adaptation : arranging a teacher-study test to identify fire reactions and work processes.

V. Sampling assessment of the costs and rewards of transition?

The conversion of gas to induction wok cooker, involving equipment acquisition, electrical engineering, possible electricity applications, ventilation adjustments, steel fittings and staff refresher, should not be compared to the price of a furnace but should be calculated in conjunction with the day-to-day operation.

Cost/impact projectsInformation gatheredCalculation method
Equipment inputsType, quantity and fittingsCost of equipment by official quotation
Electricity engineeringOn-site power supply, appliances, circuits, accessories and protection devicesOn-site assessment by co-qualified electrotechnicians
Electricity enhancementsNeed for additional power supply capacity to be applied to the power supply companyConfirmation by site condition and outcome of application
Engineering suiteStorage, ventilation, ventilation, water removal and stainless steelBased on the scope of construction and the cost of construction projects
Energy expenditureGas bills, power bills, daily operating hours of equipmentCompared with actual usage of restaurants, not estimated claimed assurance of savings
Operational trainingCurriculum test, fire creation and vegetable test arrangementsOrganization of the restaurant business plan

If the investment recovery period is to be estimated, the net annual savings from the conversion of investments can be used as a basic framework. However, electricity, gas prices, hours of use, feeding and equipment efficiency will have an impact, and therefore no single proportion should be used to calculate all restaurants. It is recommended that the actual data be compared with the previous six to 12-month energy bills.

VI. Proposed phased transition to reduce operational risk

The old copper transformation is not necessary for the replacement of all lithium appliances, and, as long as the conditions for electricity and engineering permit, individual jobs can be piloted to adapt the plutonium to determine the next step as a result.

Phase I: Electricity and field assessment

The first-spot equipment, the quantum ratings, together with the identification of cables, circuits, ventilation, drainage and bulk heat arrangements, involving the work of fixed-power installations, to be evaluated and processed by registered electrical engineering personnel.

Phase II: Selection of pilot sites

Selecting a suitable pilot nitrogen, such as Tong or one of the embracing sites, identifying appliances, lithium heights and ventilation to avoid concomitant change of too many processes.

Phase III: Organization of pilots and training

The cafeteria is used to test the heat speed, fire reconciliation, cooking and consistency in output, and record-writers are often set to develop new operating habits.

Phase IV: visual data re-engineering

The recording of the use of equipment, electricity, gas fluctuation, ventilation and staff opinion, as well as the decision to replace other lithium positions, is easier to see the actual effect than simply by forecasting.

VII. Engineering processes for gas transfer magnets

  1. Collecting information :: Provision of cafeteria type, balloons, vegetables and expected meals.
  2. On-site inspections : Quantity ramps, walking tunnels, cables, electricity supply, ventilation and water condition.
  3. Selection of equipment :: Selecting veils induction wok cooker, blankets, tungsten or cascade.
  4. Electricity and engineering assessment :: Verification of power supply, line and related scope of work by eligible personnel.
  5. Confirmation of prices and schedules Description of equipment, size, fitness, construction responsibilities and delivery arrangements.
  6. Installation and pilot Completion of equipment installation, testing on a case-by-case basis and familiarization of kitchen personnel with the operation.

Electricity or gas fixtures shall be handled by qualified professionals, and Ni-Kovic may assist in the planning of commercialkitchen equipment, equipment equipped with stainless steel appliances, for further information. Our Services.

VIII. Frequent errors in transition and ways to avoid them

Common errorsPossible consequencesRecommended practices
Unpaid gross payloads to buy a high-power valentInadequate electricity supply, zinc or need to re-engineeringFirst assessment of total load by registered electric engineering staff
Feeding power only, not testing actual vegetablesFire reactions or cooking do not conform to pupil habitsPre-positioning of representative vegetable pilots
Dumping for induction cookerVegetable oil cigarettes and gas still need to be addressedPreservation and assessment of ventilation by site and use
Neglection of the availability of magnetic magneticInduction cooker failed to normalize heating or heatingInspection of appliances on a case-by-case basis and testing of appliances
One change in all gradesRehabilitative costs and concentration of operational interferenceIf the conditions are appropriate, one job can be piloted for further expansion
Self-replacement or receptacling of high-power equipmentExposure, overloading and fire riskDesign and construction by co-qualified electrical engineering personnel

Gas switching induction cooker issues FAQ

I. Electricity and electricity

Is it possible to switch from gas to induction wok cooker?

It is possible, but not a net swap, to assess the lithium power supply, the total strength of the equipment, the location of the lithium, the ventilation of the flue, the availability of magnetic and cooking habits, and to decide on a phased transition.

Is the first step to be taken?

The first step is to take stock of existing kitchen equipment with electricity conditions, including electricity supply, electricity availability, cables and lines, and to evaluate the required electrical works by registered electrical engineering personnel.

Would commercial induction wok cooker require 380V3 electricity?

In order to look at prototypes and power, Ni-Kovic ' s head sheet induction wok cooker IW-15K/18K/25K ' s fixed electric pressure systems 380V, 3PH, 50Hz, and other lithium appliances may vary, and the appliances of other appliances will be verified on the basis of the product specifications.

What are the functional specifications of Ni-Kovic at the end of the single bill?

The product page lists IW-15K, IW-18K and IW-25K with a power ratio of 15KW, 18KW and 25 KW, respectively, with a fixed pressure of 380V, 3PH, 50Hz. Product specifications page.

Can existing kitchens be loaded with commercial induction cooker?

An assessment of the overall burden of the concurrent use of existing electrical capacity, cables, circuits and equipment should be made, and additional facilities should be consulted, if necessary, by the supply company, without any confirmation that they should not be directly receptive to high-power equipment.

Would the big power induction cooker be used in conjunction with steam cabinet?

Plans can be made, but the flat rate of induction wok cooker, steam cabinet, blowing and other equipment is included in the overall load assessment and the design of power supply and co-protection devices by registered electric engineers.

II. Pumping, equipment and safety

Can the existing pyrotechnic system be dismantled following the conversion of induction cooker?

The conversion of induction cooker should not be due to the assumption that the ventilation could be dismantled. Medium vegetables continue to produce oil cigarettes and pyrotechnic systems are to be assessed by the relevant professionals on the basis of appliances, vegetables, kitchen layouts and applicable requirements.

induction wok cooker canwok tosing?

The veterinduction wok cooker, in conjunction with the appropriate lithium, can cope with the chrome, but the electromagnetic magnetic spectrometry needs to be close to the bottom, with a slight difference in the operational modus operandi, and it is suggested that a spectator test be arranged to confirm the actual turbulence.

Induction wok cooker? Would it be used?

To use magnetic appliances, such as iron cooks, ferromanganese or magnetic bottoms, the original lithium may not be used and shall be confirmed on the basis of the appliances.

Would the magnetic be transferred from gas, and should all the lithium be replaced once?

It may not be necessary to assess the conditions for the supply of electricity and to opt for a phased conversion, for example, by treating the tungsten or one of them, and by planning the plutonium area once the pupil adapts to and confirms the supply arrangement.

Is the conversion of induction cooker saving energy costs?

Actual energy costs are affected by electricity prices, gas prices, cooking time, feeding, equipment power and usage habits, and are not guaranteed by the type of appliance, and it is recommended that the actual cafeteria be used to estimate the overall cost of using the equipment.

III. Engineering arrangements and cooking adaptation

What parts of the kitchen are to be changed by gas to electromagnetic requirements?

Frequent needs assessments of electricity supply and cables, independent electrical circuits, lithium appliances with work chairs, ventilation, heat spaces, lithium appliances and teacher training. The actual scope of work is confirmed by site surveys.

Would the restaurant need to stop during the conversion of the gas lithium?

Depending on the scope of the work, the on-site construction arrangements and the need for electrical rehabilitation, the possibility of sub-sector construction or phased installation would be assessed by the engineering team on the basis of the shop shopping arrangements and would not be able to pre-assure the shutdown.

How much time will be reserved for retrofit engineering?

The duration of the work would be affected by applications for electricity, electrical engineering, the number of appliances, the conditions for the construction of stainless steelkitchen equipment with the site, after which the programme was confirmed, the actual schedule should be provided by the engineering and electrical operators.

How long do the puppet adapt to induction wok cooker?

The timing of adaptation varies from pedestrian experience to appliance modes of operation to vegetables, and it is proposed that pre-installation be arranged and that new processes be developed with a view to establishing a common lithium-to-operate method for the recording of lifts.

Can a single tail be replaced only?

The replacement of only individual jobs can be checked, but new sizes, electricity supply, lithium plating are identified to work with the site.

Would the stainless steel copper be replaced with induction wok cooker?

It is not necessary to compare new sizes, fiduciary, high level of work, heat line requirements; if existing clouds are not appropriate, reference can be made stainless steel work booking.

IV. Cost and Ni-Kovic services

Gas switching induction wok cooker investment recovery horizon?

A preliminary estimate of the annual net savings from the conversion of investments from the early stages of the copper can be made, but the initial investment is calculated using actual information from the restaurant, including equipment, electricity, electricity, gas, air conditioners, winds, maintenance and co-utility.

Did Ni-Kovic provide roof engineering for gas transfer magnets?

Ni-Kovic can provide commercial induction cooker-selectricity and kitchen equipment with the same-stop bathroom engineering advice. Electricity and gas fixtures are to be handled by qualified professionals on site conditions.

The specimen started consulting gas switching induction cooker?

Please prepare cafeteria typologies, bathroom graphs or sizes, main vegetables, available power supply materials for the expected start or retrofit time. WhatsApp Or telephone contact Ni-Kovic.

Induction wok cooker is planned for the conversion of medium-sized kitchens?

Initially, on-site conditions begin with a supply assessment, and the planned appliances for the restaurant are in the transition phase; Ni-Kovic can assist commercialkitchen equipment selection and bathrooming with the same-stop engineering advice.

Enquire on WhatsApp Contact Us
Web design by EC Shop City