Details make the difference. Commitment takes us further.

Induction cooker ' s rationale?

There is no fire, no hotlines, a robbbing of the hot shoes, and no heat is placed on the back of induction cooker, which is the electromagnetic sense that was found almost two hundred years ago. This paper is presented by Ni-Kovic in the white Hiroshima, and is used in Hong Kong by the physics for commercial induction cooker.

WhatsApp consults commercial induction cooker Looker of the commercial induction cooker series

Author: Ni-Kovic Ni-Kovic Ni-Kovic Kitchen Equipment| Final update: Categorization: Kitchen Insights

In the first sentence, induction cooker hot spots?

The ring of high-frequency fluxes produces a transected magnetic field where the magnetic field is exposed to a fluid flow at the base of the iron tumours.

  • Thermal power is generated in a appliance and is not flash heat.
  • General frequency of work is approximately 20 to 100 kHz.
  • The use of magnetic appliances, such as iron coatings, ferromanganese tungsten.
  • Energy is directly intrusive, heat-efficient and lucrative.

I. The electromagnetic sentiment: from the French version

1.1 Falah electromagnetic reactions

The British Scientist, Farah, found electromagnetic reactions in 1831: The fast-changing magnetic field will result in electro-flows from the nearby mentors Generators, transformers and induction cooker are based on this rationale.

1.2 Transfers from sensory to heat

The injection of the injection of the injection of the fluctuated fluctuation will be hotly driven by electrical dispersal (ear hot). Induction cooker produces a large volume of sensory streams on the clouds and converts power into heat.

1.3 IH induction cooker

IH is a contraction in Induction Heating (sensure heating). IH induction cooker is the appliance of the heat, which is the same reason.

II. Induction cooker internal structure

ComponentRole
Micro glass floorInstallation of appliances to allow magnetic field passage; in itself, not heat source
SensitivitiesAccess to high-frequency communication grids, resulting in an altered magnetic field; ultraviolet rings
Flows and mobile circuitsConversion of municipal electricity into high frequency communication, often using IGBT-based semiconductors as high-speed switches
Control of electrical circuit boardsReconciling power, archiving, timing, handling various protection signs
Heat sensorsDetection of coating temperatures for dry burns with heat protection
Difference of heat pumps with bulk heatCarrying out electronic components heat, particularly high-power commercial aircraft
casualtyCommercial aircraft multi-usestainless steel body, resistant to cleaning and fit with water-proofing design

III. Induction cooker heating process 5 steps

  1. Metropolitan electrical inputs : The number of households is multiplied by 220V, and the utility commercial machines generally use 380V terrain.
  2. Converted to high-frequency flux : Electrical streams, high-speed switches from power semiconductors and high-frequency exchanges.
  3. The line ring produces a cross-cutting magnetic field : High-frequency stream run-off rings, creating a magnetic field that is changing in the direction and passing through the floor.
  4. Bottom fluids : The magnetic field is supposed to run a ring cable in the magnetic bottom.
  5. Skill hoting : The hydraulic fluctuation with the magnetic stagnation of the bottom heat and relay to food.

Specified fire?

Control of the power of transmission of electrical circuits, such as changing the frequency of switching or the proportion of time of export, thereby altering the magnetic field ' s intensity with the bottom heat, so that induction cooker can be fine-tuned by slotting or power and reacted more directly than gas burns.

Sufficient ignorance of commercial lithium and ignition options available How commercial induction cooker power is selected.

IV. Three heat mechanisms: flush, magnetic depression, superficial effects

4.1 Cable flux (main heat source)

The fluid magnetic field, which is supposed to run a ring ring fluctuate, is called a fluid flow, which is blocked by the metal and generates an ear thermal hot, the main heat source of induction cooker.

4.2 magnetic stagnation (expensive heat source)

The magnetic area in which iron magnetic material (e.g. iron) enters is constantly shifting to the magnetic field, where energy consumption is consumed and converted into heat, called magnetic stagnation. This is an additional heat source of iron-quality appliances.

4.3 Phyper effect (rmal concentration)

The high-frequency interactive magnetic field can force the flux to a thined area on the surface of the bottom, called a superficial effect. Electrical flow tunnels are changing, electrical barriers are increasing and heat is more concentrated. The concentration of iron magnetic materials is particularly effective.

Simple peggs: Induction cooker had a transformer with a lithium, a linear ring, and the bottom was a second line ring of a short roadblock, with a feeling that the electric flux was completely hot at the bottom.

V. Iron-free pumps, no plutonium?

5.1 Rationale

The electromagnetic material is highly magnetic, bathymetry, electric streams are concentrated on the bottom layers, equivalent electro-resistant, and the power from the rings is largely heated.

The plutonium is not magnetic, and the electrical power is high, with a high degree of superficial depth, with a approximation of equivalence, which makes it difficult to effectively transmit to the appliances, and generally induction cooker detects a lack of proper load or a hypertension.

5.2 Speeding

Materialinduction cooker applicable
Iron, carbon steel copperApplied, medium-sized preferred
Iron copperApplication
magneticstainless steel/floor with a guided magnetosphereApplication
General non-guided magnetstainless steelNot necessarily applicable, magnetic test
Aluminium, aluminiumGeneral not applicable
Glass, ceramics, plutoniumNot applicable

Simple test: The use of magnetic stones to absorb the bottom is usually used.

VI. Induction cooker vs electric ceramic vs calculator vs flammated gas

ToysHeating methodsCookwareFloor temperatureOpen Flame
induction cookerElectromagnetic sensors, appliances per heatTopicsFloor reserves are less heat, but are affected by the red red tapeNo
Ceramic pumpsHeating metallurgical plates, relayed to copperMost of themFloor plating, post-clock hotNo
Electrical panelsDirect heat transmission of electrical dispersed heat boardsMost of themHeatboard high temperatureNo
Gas pumpsFire combustion heatingMost of themStorting, chicken head temperatureYes

The Board noted that cable ceramic pumps continued to maintain thermal pumps after the flashboard, through thermal appliances of the pyrometry, and that the commercial comparison between the burn cooker and the gas can be seen induction cooker ' s lithium with the lower heat. Commercial Induction vs Gas Cooking.

VII. Heat efficiency and temperature control: Stress induction cooker saving energy?

7.1 Generic efficiency data

OECS quoted US Department of Energy Information: Induction cooker transferable energy conversion efficiency contract 84% Electrical plates 71% Ni-Kovic product data indicate that electromagnetic heating efficiency can reach 80 - 90 per cent.

7.2 Measurement of savings

The Metropolitan Cyclone test, with two legs, induction cooker about 2 yen, fires about 3.84 yuan; the energy efficiency of the bar building is approximately 8 for details. Five Ways Flameless Kitchens Can Reduce Costs.

7.3 The kitchens are faster

Thermal power is concentrated in the appliances, and the media refers to induction cooker ordering the temperature of the bathrooms that are lower than the general bathrooms 4 to 5°C.

VIII. Safety rationale and protection design

8.1 Rationale security advantage

  • No fire, no gas Eliminating leakage and combustion is not entirely at risk of combustion.
  • Without mercy Detection of suitable lithium appliances reduces or stops output.
  • Little flash storage hot : The masks are not heat sources, but the appliances of the legs will still suffocate.

8.2 Common protection designs

  • Heat protection against dry burns (temperature sensors)
  • Excess, over pressure, under pressure protection
  • Protection of steep wind failures
  • Separation of water and electrical components and water-protection design for commercial aircraft

Detailed dismantling can be accessed C-induction cooker security?separation of water and electrical components and 5 large security design.

International test standards: IEC 60335-2-9, ICEC 60350-2, etc., covers security projects such as structures, temperature symptoms, when the IRB testinduction cooker, and the supplier product may be asked to design the same test on the basis of the cloud criteria.

IX. magnetic field, radiation homogeneous cardiologists

induction cooker Non-electrication The medium-frequency magnetic field differs from X-ray ionizing radiation. The magnetic field is the strongest near the bottom, the more remote.

IEC has been magnetic density at a distance of 30 centimetres according to European standards, resulting in lower than the reference level established by the International Commission for the Protection of Non-Emission Radiation (ICNIRP).

Use of recommendations

  • The appliances are placed in the veterinary centrality, with a large area of collusion
  • Maintenance of appropriate distances for normal use
  • Accompaniment of cardiologists, the Committee recommends that the appropriate distance be maintained and that the doctor be consulted with the reference engineer manufacturer.
  • Unliquidated open machines

X. 面induction cooker vs lateralinduction cooker

10.1 Faceinduction cooker (induction wok cooker)

The ring of the rings is immersed with a medium-sized cloud, with a larger area close to the sensory area, suitable for copper, blast, cooking, and reduced heat during the evaporation due to increased stress and reduced heat, so that the wok tosing is fit for less evaporation. C-induction wok cooker energywok tosing.

View the Induction Wok Cooker with Rear Stock Pot →

10.2 Eating cooker (flat-top induction cooker)

The rings are paved with a plain floor, suitable for chests, veils, cooker, cooker, four floors induction cooker and electromagnetic tungsten.

Looker induction cooker →

XI. Household vs commercialinduction cooker: as in theory, the specifications vary considerably

ComparisonHousehold induction cookerCommercial Induction Cookers
RationaleElectromagnetic heatingElectromagnetic heating
PowerThe Agency ' s mandatory label covers each heating module 700W to 3,500WLocation 3.5 KW ; 炒炉, Tong 12KW to 25KW (Ni-Kovic specifications)
Electrical pressure220V Separate220V or 380V III (high power)
Cooking SurfaceMulti-facetedPlains, veils, chests, mixers
StructureChronologystainless steel body, enhanced heat, water defence
Intensity of useIntermittent useLong-term high-intensity operations

Detailed information may be obtained Home vs commercialinduction cooker 5 key, respectively.

XII. Application of electromagnetic sensor technologies in commercial kitchens

Accompaniment heat equipment

Inflammable kitchens are deducted from 咗induction cooker, with electrical heat equipment: Three-Door Electric Steam Cabinet, Dim Sum Steamers, Rice Roll Steamers, and Bombing, copper, tea and coffee urn For example. Complete list of commercial heat equipment.

Complete Kitchen Project

by Blocks Electricity assessment, equipment selection, to Factory Ni-Kovic provided fabricated stainless steel work copper, refrigerator chicken, plating cigarettes Complete Commercial Kitchen Projects The transition from combustion to electromagnetic can be referenced. Complete Plan for Converting Chinese Kitchens to Induction Woks.

Induction cooker ' s usual issues

Induction cooker ' s reasoning?

The rings are connected to approximately 20 to 100 kHz high-frequency exchanges, generating an alternating magnetic field; the magnetic field is exposed to a fluid in the magnetic base, combined with magnetic stagnation and thermal effect of the appliance itself.

IH Why?

Induction Heating, i.e. sensory heating, IH induction cooker is a appliance with electromagnetic sense.

Do not use Dinduction cooker?

The zinc is not magnetic, plating superficial depths, with equivalent electrical discrepancy, and the power is difficult to effectively convert to the heat; and the magnetic appliances contain superficial depths, electrical barriers and heat concentration.

The specimen are not used to induction cooker?

The use of magnetic stones to absorb the bottom is generally used; the bottom is to be nurtured and fit with the veil.

Induction cooker thermal efficiency is very high?

The Office of Electrical Engineering quoted the United States Department of Energy data, induction cooker, about 84 per cent, electric heat boards, about 71 per cent, and Ni-Kovic product data, which could reach 80 - 90 per cent.

Induction cooker face will not heat?

The veil is not a heat source and the heat is smaller; however, the redundant heats are struggling to be cleaned before being cooled.

Induction cooker does not have radiation and does not affect health?

Induction cooker produces a non-electric magnetic field; ICNIRP has a lower magnetic density than the ICNIRP reference level according to the European standard mass distance of 30 cm.

Would the kidney kicker be used in induction cooker?

The Board recommends that the appropriate distance be maintained and that the doctor be consulted with reference to the manufacturer of the inner packaging.

Would the use of induction cooker be the same as commercial induction cooker?

The same reasoning is true; commercial power, electric pressure, heat, water protection and patience have increased significantly, and large power machines generally use 380V terrain.

Ni-Kovic has sideline commercialinduction cooker?

Induction wok cooker, electromagnetic cooker, four top terrain induction cooker, seating helmets and two headflat-top induction cooker, configuration series, welcoming electricity 2155 2826 or WhatsApp 85293131881.

Related commercialkitchen equipment and kitchen equipment

:: Reference is made to electromagnetic sensor physics and open technical literature; information on efficiency and safety reference machines, consumer committees and media; product specifications are derived from Ni-Kovic product information for reference purposes only.

Look for the rationale and the next option for commercial induction cooker

Thanks to your menace, job-to-people power, Ni-Kovic can choose with you suitable for veils, blankets, tungsten or cohesives.

WhatsApp 85293131881 Contact Us
Web design by EC Shop City