Ni-Kovic electric heat blows MCN1 single blows 3KW 220V commercial cable blows

Details make the difference. Commitment takes us further.

MCN1 3 3KW 220V Cable Battery Passage Passage Series

Ni-Kovic MCN1 electro-heat blows with heat plating oil, with no fires and no combustion of gas. The craft is only 375 × 460 mm and can be placed directly on the stainless steel work chicken, chicken, cooking, cooking and cooking, with Hong Kongfe-style cafe.

  • Model MCN1 (a single blow)
  • Power 3KW
  • Rated Voltage 220V, 50Hz
  • Overall Dimensions 375 × 460 × 360mm (H)
WhatsApp search blows Access to all electrical heat equipment

MCN1 specialization of thermal blast

The following is the standard type of Ni-Kovic cartridge series MCN1 (single blow), with other dimensions, and is available at the same position as the job lithium as you produce.

ItemSpecification
ModelMCN1 (a single blow)
Type of product Electric Cooking Equipment (electrical blast)
Power3KW
Rated Voltage220V, 50Hz
Overall Dimensions375 × 460 × 360mm (H)
Other dimensionsOther sizes are available and enquiries are welcome

Acquisition of the specifications of the chicken group?

  • MCN1 (a single blow): This is a blow, and if two foods are to be blown up, two platoons can be considered or other configurations can be consulted.
  • 3KW: Cable cable battery is common at the power level and is suitable for small and medium-sized feeding.
  • 220V, 50Hz: Consistency with Hong Kong ' s general order for electricity supply does not result in three different types of electricity; however, it is necessary to retain the electricity flow (for details, see below). Electricity arrangements) .
  • 375 × 460 × 360mm (H): Extended 375 mm, deep 460 mm, high 360 mm, subdivided and available Stainless Steel Worktables above.
Details of palm capacity, temperature range, blowing volumes, etc., will vary from one type to another. Before the landing order, we are requested to confirm the final specifications with the equipment motto.

Thermal blast specimens operate?

Electrical heat blows (also called electric blows, commercial cables) are plating oils that will be blown into the surface with electric hot tubes to set temperatures, and feeding into the blowing of hot oils, which are produced in a process that does not allow the burning of fires, or commercial heat equipment that is commonly used in uninflammable burns.

Heating rmal heating

Thermal pipes are directly painted or heated on the bottom of the blowing, the heat is directly summoned to blow oil, rising to temperature and stability.

Wind-water maintenance

Wind control devices will reduce or stop the heating after the temperature reaches the set value, drop back to the chicken re-automatic heating, and maintain the oil temperature in the set range.

Breakdown of access

The blowing of the food fell and the blow was followed by the introduction of drip oil on the blow, which would facilitate the control of each turn of the blast.

For other inflammable equipment, reference may be made Complete Commercial Electric Equipment Checklist: Eight Essentials for a Flameless Kitchen.

Six advantages of commercial electric fryer

1. No fire

The use of electro-heat, the lack of fires and the reduction of the risks posed by the fire, as well as the cooking of gas pumps with the relevant facilities.

2. Oil temperature stability

Windhoeks are automatically maintained, and the colour of each transplant is more common and reduced by approximation of the wheel.

3. Savings of seats

375 细 460 mm of craft, which can be placed on the chicken, refrigeratorator or next to the rest.

4. 220V Separate electricity

Without triple electricity, fitting with suitable independent circuits can be installed and suitable for checking with temporary additional jobs.

5. Access to cleaning

Without combustion residues cobalt carbon problems, the main part of the day is the clean-up of palm oil.

6. Extensive use

Hong Kong-style cafe ' s usual blows are met by shrimps, chickens, shrimps, cyclists, swallows.

electric fryer vs gas blows vs electromagnetic blows

Three types of blows can be used as commercial oil blows, mainly in heating, building requirements with speculation.

Comparison Pointelectric fryer (e.g. MCN1)Gas blowsElectromagnetic blows
Heating methodsElectrical heating blowing oilCoal combustion gas or gas heatingThe electromagnetic sensors blow the fever per se
Open FlameNoYesNo
InfrastructureElectricity (MCN1 220V)Gas supply, plumbing and safety facilitiesElectricity, GWP general 380V 350
Specified flexibilityStorage can be flexibleLocation of flammated gasVariance No.
ApplicableSmall- and medium-sized bunkers, auxiliary blows, no-fired kitchensTraditional kitchens with gas facilities availableBreakers, total electrified kitchen

Electromagnetic blasts or other electromagnetic configurations are welcome Contact Us Reference could also be made to the integration of multiple workplaces Electromagnetic combination CF-26 For a complete comparison of electricity and gas kitchens, see Commercial Induction vs Gas Cooking and Five Ways Flameless Kitchens Can Reduce Costs.

3KW 220V Electricity Arrangement

Crude estimates of cables

I ≈ 3,000W ÷ 220V ≈ 13.6A

MCN1 fluctuates approximately 13.6A at the time of filling, slightly higher than Hong Kong ' s general 13A insertion, so it is not recommended that the general appliances be placed in 13A plugs, let alone trailers.

Pre-installation recommendations

  • An assessment by a registered electric engineering staff to arrange for an independent circuit to be fitted.
  • Unsatisfaction electric griddle, Tea and Coffee Urn Other large-power equipment is co-located with the same electrical circuit.
  • The total power of buried total kitchen equipment is determined to be insufficient.
  • The grids are located far away from blows, hot oil and water.
  • In Hong Kong, the fixed power plant works are carried out by registered electric operators with registered electric engineers.

Reference to commercial blowing oil

General oil blast temperatures range from 160°C to 190°C. The principle is that thickness or food to be exploded is less fluid and that the thin or furbish is more moderate. The following are common reference directions and the actual temperature is subject to adjustment by dietary appliances.

SituationOil temperature orientationExamples
Sickness, ribs, blastsLower temperature (around 160°C)Breaks, thickness
General blowsMedium temperature (approximately 170–180°C)Crude, sharks, sunflowers, sunflowers
Stereotypes, fast blows, shrapnelHigher temperature (approximately 180–190°C)Second blows, blows
Meat blows to the centre are fully well versed, and refrigeration is to be as close as possible before the drowning of the food, and it is not too many for a single time, if the oil temperate is dropping, and it is easy to palm oil.

Thermal blows are suitable for the cafeteria?

Hong Kong-style cafe, Hong Kong-style cafe

The blows, blows, wings and staple meals can be matched. electric griddle, Electricitytea and coffee urn and Electric Hot Water Urns.

Fast restaurants, restaurants

Fast blows such as shrimps, sticks, fish bags, can be placed in the vicinity of the restaurant and shorten the resting time.

Coffee, coffee shop, bars

Whaling of fish rings, blowing wings, blowing of chicks, etc. Countertop Induction Cookers and Electrical fever.

Causes, bars

Carrying a auxiliary blow to the bar building kitchen equipment, blowing up sprays, swallowing up the previous vegetables and handcuffing. Commercial Induction Wok Cookers.

Heart shop

Breaks, e.g., springs, corners, etc. Dim Sum Steamers and Rice Roll Steamers It consists of a complete spot.

Cafeteria, central kitchen

Extensive feeding, multiple and blowing lines and re-engineering Three-Door Electric Steam Cabinet and Four-Zone Induction Ranges.

Code of Safety for Commercial Bombing

Daily operations

  • The oil was not well above the blowing water line, nor was it lower than the minimum water penetration.
  • Whenever possible dry water ished before food landing, water exposure to heat oils is immediately blasting.
  • The blows were not operational, nor did they place the blows on the gate or on the point where they could be collusive.
  • The blows must be placed on a solid stainless steel cemetery, with flammable items on the side.
  • Collaboration Stainless Steel Extraction Hoods The same ventilation system removes oil smoke.

The palm ignition is handled?

  • In absolute non-availability of water The water irritation is tantamount to hot oil.
  • Immediately interrupted the blowing of the power source.
  • The fire extinguishes are completely covered by the blows and are isolated from the air.
  • Use of fire extinguishers suitable for palm oil fire alarms.
  • The situation was immediately left without control and gave electricity 999.

The kitchens should be set up in the vicinity of the blows, and staff should be familiar with the methods used.

Electric fryer cleaning and maintenance

  1. Daily palm oil : The temperature of oil, such as the harvest, is downgraded to safe temperatures, and the paints are shaped with shreds, slowing down the oil vapour.
  2. Retention of oil quality : The oil fluids, foams, pyrotechnics or falsifications are the time for fuel.
  3. Cleaner blows : A complete cleaning blowing of the pyrometall above the heat pipe during the exchange of oil.
  4. Cleaner blows : Daily cleaning of blows to avoid the accumulation of oil.
  5. Examination of electricity :: Regular check-ups of electrical cables, plugs and temperature control; unusually immediate shutdowns and referrals to professional examinations.

Waste oil and water treatment

The scrap oil should not fall into the water canals, but it would also pollute the environment; it should be collected by the containers after the refrigeration of the oils and be treated by the scrap oil recyclers.

Water for kitchens should be matched Stainless Steel Grease Traps Reduction in the flow of oil fats into drainage systems. Ni-Kovic is able to search for stainless steel insulation pools, cylinders, plugs and platings in size. Stainless Steel Worktable without Upstand Stainless steel stars, stainless steel layers, etc. 304 stainless steelkitchen equipment.

Selection of Ni-Kovic commercialkitchen equipment?

On-Time Delivery

Pre-delivery is our most basic and most important commitment to clients.

Our Own Factory in Mainland China

Trade has been integrated since 2013 and is managed directly by R & D and the Kitchen equipment plant.

Made to Measure

The stainless steel work with steel is to be constructed in line with the actual size of the kit.

Complete Kitchen Project

The same team is responsible for planning, ordering, installing and selling.

As the Hong Kong Commercialkitchen Equipment Company, Inc., we provide one-stop commercial kitchen engineering. Details can be found. Our Services, Projects, Our Clients and A Complete Guide to Restaurant Kitchen Planning in Hong Kong.

Frequent problems with electro-thermal blasts

MCN1 Specification of thermal blows?

MCN1 power 3KW, fixed pressure 220V, 50Hz, outer foot 375 460 460 mm 360 mm (H), with other dimensions welcoming Enquiries.

3KW Cables may not be directly emplaced 13A?

3KW completed the load of approximately 13.6A under 220V, slightly above the flat value of the general 13A intervention. It is recommended that the registered electric engineering staff evaluate the placement of an independent circuit with a suitable method of receptacle and that it not be used in conjunction with other large power appliances.

How much should the commercial cable blows blow oil?

General oil blast temperatures range from 160°C to 190°C, depending on the staple food: lower temperatures are used for thickness or for the purpose of blowing food, higher temperatures for thinness or plumbing.

Is the electric fryer apart from the gas blow?

The electric fryer was heating with a heat plating plating, without fire and without combustion of the gas, and the galleries could be flexibly discharged; the gas blowing burns were supplied with the relevant security facilities; and it was selected to look at the lithium power, gas conditions and meals.

The blowing of the fire should be addressed?

The oil burns are absolutely unavailable for water; the power source should be intercepted immediately, covered by fire extinguishers or used fire extinguishers suitable for painting fire alarms, and the situation is immediately left and electrical 999.

Waste oil should be disposed of?

The scrap oil should not fall into the water canals, should be collected from the containers after the cooling of the oil and be treated by the scrap oil recyclers, and should be complemented by a septic tank to reduce the flow of oil resin to the drainage system.

What is the intention of selecting a suitable electric fryer for your blowing site?

We know your blows, meals and work-sizes, and Ni-Kovic will offer you the appropriate blow-up kitchen equipment programme for the restaurant.

WhatsApp 85293131881 Call 2155 2826
Web design by EC Shop City